Amprobe MEGATEST-1000 Megohmmeter - Manual (Page 23)

5.3.2 RECALL
If you want to recall the stored test results proceed as follows:
1. Press
the RCL key.
RCL
MEM
3
P02
If the memory of the instrument is not
empty it displays the screen
alongside.
Number of the memory location in which
the measurement results were stored.
Value of the parameter P related to the
saved measurement.
Riso
o
no rcl
If the memory of the instrument is
empty it displays the screen
alongside.
2.
Use the keys ▼, ▲ to select the memory location number to be
displayed.
▼
▲
3. Press
the DISP key to display the test result related to the selected
memory location.
DISP
4.
Use the keys ▼, ▲ again if you want to display again the numbers of
memory locations.
▼
▲
ESC
Press the ESC key at any point you want to quit the memory
management mode and go back to the selected measuring function.
22