Cleaning the filter en operating problems – DE DIETRICH 6335EN User Manual
Page 8
8
To maintain an optimum vacuum, we recommend that you carefully clean the filter at least once
every two months or whenever you notice any problems with air passing through.
• Remove the filter from the connection
system by pulling the little tongue with
a set of small pliers.
• Rinse the filter under the tap.
• Re-insert the filter in its housing and
check that it is correctly positioned.
• Fold up the tongue.
The vacuum does not form correctly:
Cause: the filter is dirty
•
The filter has not been cleaned for a long time or is obstructed by a foreign body blocking
the flow of air.
•
If the problem persists, contact the After-Sales Service.
Deformation of the box :
•
This is a normal occurrence: the box's lid deforms when the vacuum is created.
Cleaning the filter
EN
Operating problems