DE DIETRICH DOP1160 - Manual (Page 32)

32
EN 2 / USING YOUR APPLIANCE
PYROMAX PYROCONTROL
Niveau de salissure
(1)
(2) (3) (4)
(5)
Remove any large-scale food residue that
may be in the oven, to avoid the risk of
ignition or excessive smoke.
Select “Cleaning” from the main menu. Your
oven indicates the dirtiness of the cavity and
suggests two cleaning modes:
Pyromax and Pyrocontrol.
A) Pyromax
Pyromax is a pyrolysis system with a pre-set
duration: it lasts for two hours and provides
thorough, intensive cleaning of the oven
cavity.
To delay the start time, select end time and
change it by entering the desired end time
for the pyrolysis cycle.
Note: If you entered the information for off-
peak hours and peak hours (see Settings
function), your oven recommends a cleaning
cycle during off-peak hours to save on
energy costs. However, you can change this
recommendation by changing the end of
pyrolysis time and starting the cleaning cycle
immediately, if you choose.
Confirm by pressing “OK”.
The cleaning cycle begins. Your screen
indicates:
- the time (1)
- the total cycle time (2)
- the remaining time (3)
- the pyrolysis cycle end time (4)
- door locking (5)
Note
Surfaces may become hotter than
during normal use. It is advisable to keep
small children at a distance.
O K O K
B) Pyrocontrol
Pyrocontrol is a system that lets the oven
automatically calculate the cleaning time
depending on the amount of soiling, which
makes it possible to save energy by adjusting
the pyrolysis time to actual need.
If you with to delay the start time, select the
end time and change it by entering the
desired end time for the pyrolysis cycle.
Confirm by pressing “OK”
O K O K
HOW TO PROGRAMME A PYROLYSIS CYCLE •
D De eg grre ee e o off s stta aiin niin ng g