Electrolux 241940002 - Manual (Page 7)

7
To level the cabinet using the front rollers (select
models):
1 Slightly open freezer drawer. Lift the left side
of the toe grille and gently pull forward (see
illustration).
2 Lift the right side of the toe grille and gently pull
forward to remove toe grille (see illustration).
Installation
6 Replace the toe grille by fitting it into place.
5 After unit is leveled, lower anti-tip leg until it
contacts the floor.
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator stable. DO NOT use the anti-tip
leg to level the refrigerator.
3 Close the drawer and use a flat-blade screwdriver
or ³⁄₈-inch socket wrench to raise or lower the
front rollers.
4 Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.