beautypg.com

Changing the water and air filters, Ordering replacement filters, Air filter – Electrolux 241940002 User Manual

Page 29

background image

29

Reinstall Water Filter

Ordering replacement filters

Order new filters by calling 877-808-4195, online at

www.electroluxappliances.com, or through the dealer

where you bought your refrigerator. You may want to

consider ordering extra filters when you first install your

refrigerator.
Water Filter FC-300

PureAdvantage

TM

Replacement Cartridge #

241932301

Air Filter Replacement cartridge, part

#

241754001

Air filter

The air filter is located inside of the left door above ice

maker chute.

Replacing your PureAdvantage

TM

air filter

To ensure optimal filtering of refrigerator odors, you

should change the air filter every six (6) months (the

filter status light on the Touch Panel prompts you to

replace the filter after six (6) months). You may want

to adjust this time period depending on the types and

amounts of food you typically store in your refrigerator.

1 Open the air filter door.

2 Remove the old filter and discard it.

3 Unpack the new filter and slide it into the housing.

4 To close the air filter door, push the top and

bottom to lock the door closed.

5 Press and hold the Air Filter Reset button on

the control panel for three (3)seconds. When the

display changes from “

Replace” to “Good,” the

status has been reset.

6 The Air Filter Reset will turn itself off after a few

seconds.

Changing The Water and Air Filters

5 Push firmly until the cartridge snaps into

place (you should hear two clicks). When fully
engaged, the front of the filter cartridge should be
flush with the filter release button.

6 Turn On the ice maker at the control panel.

7 Press a drinking glass against the water

dispenser while checking for any leaks at the filter
housing. Spurts and sputters may occur as the
system purges air out of the dispenser system.

8 Prime the water supply system as described

previously.

9 Press and hold the Filter Status button on the

control panel for three (3) seconds. When the
display changes from “

Replace” to “Good,” the

status has been reset.

Close

Door