Magnetic Products ECLIPSE Automag MPI flier - Manual (Page 2)

No consumables required
Automag only requires small amounts of compressed air, which powers
the process. It does not require filter cartridges, or any other filter media.
Fully autonomous
Let operators do what they're good at: operating expensive and critical
machinery. Automag can run 24/7 continuously without the need for
operator intervention.
No loss of fluid
Automag, when used with a purged fluid cleaning device, produces a dry
‘cake’ of contamination that can be recycled. Unlike cartridge filters no
fluid is thrown away with contaminated filter media.
No line pressure increase
Even when fully saturated with contamination the Automag never builds
up the backpressure that causes burst socks or cartridges. The Automag’s
design ensures pressure is always maintained.
No maintenance
The only moving part in the Automag system is the magnetic core shuttle.
The magnetic cores are encased in stainless steel tubes; fluid does not
come into contact with any moving parts.
Sub-micron filtration
Automag removes sub-micron magnetic contamination, improving surface
finish and overall machined accuracy.
PLC compatible
All Automags can be supplied with a fully programmed PLC that can
communicate with machine tools or auxiliary equipment. This also allows
multiple Automags to operate in parallel.
The benefits of automated
magnetic filtration