Magnetic Products AMG Series All - Manual

Application: MPI's ALL MAGNETIC GRATE (AMG
series) magnets provide tramp metal protection in a
wide variety of free-flowing product streams. They are
ideal for use in gravity-fed vertical chutes, hoppers,
receiving areas, and catch bins. AMG grate magnets
are easy to install and offer efficient, economical
magnetic protection of processing equipment used in;
grain milling, plastics molding and extruding or other
machinery from damage caused by tramp metal, plus at
the same time improve or maintain product quality
standards.
Operation: The product stream flows through two
rows of magnetized 400 series stainless steel magnetic
diverters. The diverters are seam welded to the
non-magnetic stainless steel magnetic element
housing. Tramp metal contaminants are captured and
retained over the entire grate surface, providing 100%
contact with the magnetic area.
Quick-Cleaning ALL-MAGNETIC GRATES (AMG-QC
Series) are cleaned by simply removing the magnetic
elements from the element housing, demagnetizing the
entire frame and allowing the tramp metal to fall off the
diverters.
Standard All-Magnetic Grates (AMG Series) are lower in
cost, but require more time-consuming manual
cleaning.
Series: AMG
All Magnetic Grate
HEAVY-DUTY ALL WELDED
CONSTRUCTION
ALL SURFACES
100% MAGNETIZED
TYPE HD-2 90° DIVERTERS, TWO
STAGGERED ROWS
1" SPACING BETWEEN DIVERTERS
REMOVABLE
MAGNETIC
ELEMENT
Model Shown
AMG-6R-QC (Quick Clean)
MPI Homepage Our Services Contact Us