Emerson Radio HR2003 - Manual (Page 10)

9
SETTING THE CLOCK
The clock must be set with the radio ‘Off’.
1.) Press the MEMORY/CLOCK SET button for
at least two seconds. The time display begins
to flash.
2.) While the display is flashing press the TUNING + /CLOCK SET-H button to
adjust the hour. Be sure to set correctly for AM or PM.
3.) Press the TUNING – /CLOCK SET-M button to adjust the minutes.
4.) When the display shows the correct time,
press the MEMORY/CLOCK SET button
once more. The display stops flashing and
the clock begins to run.
Note: The correct time will always appear on the display when the radio is ‘Off’.
AM
PM
HR2003_ib040903.p65 9/4/2003, 11:12 9