Epson C82314 - Manual (Page 39)

COMMAND 36: SUPPRESS IBM CONTROL CODES
This function is used to select suppression of all or some IBM control codes
sent from the host system.
VALUE DESCRIPTION
*0 Obey all IBM control codes
1 Suppress all IBM control codes
2 Suppress only LPI and CPI control codes
3 Suppress only CPI control codes
4 Suppress only LPI control codes
5 Suppress print quality specified in the PPM command.
NOTES: If this command is set to 1, documents will have to be formatted by
sending transparent control codes to the printer using Command-
Pass-Thru or SCS mode transparent data
If this command is set to 2, the SCS pitch (CPI) and line density (LPI)
commands are suppressed (Not sent to the printer).
EXAMPLE: &%Z36,2 No LPI or CPI commands are sent to the printer.
The printer prints using the user specified selections.
COMMAND 37: VERTICAL CHANNEL SELECT (VCS)
Specifies vertical channel select VCS) emulation.
VALUE DESCRIPTION
0 3287 VCS emulation
*1 3268/4214/4224 VCS emulation
EXAMPLE: &%Z37,0 Selects 3287 VCS emulation
A-15