Epson C82314 User Manual
Page 37
VALUE DESCRIPTION
*0
No extra FF is sent
1
Send FF after time out value
NOTES: The time-out value is the same as the time-out used to switch between
host and alternate host printer sharing. (See Command 51)
Generally, the host application generates a termination FF, and there
is no need to change this command from the default.
In duplex printing, the last page will be ejected.
EXAMPLE: &%Z27,1
Sends FF after time delay selected by command 51
(default = 10 sec.) when unprinted data remains in
the print buffer.
COMMAND 31: TRUNCATE/WRAP SELECT
The user can select whether the interface truncates or wraps the text if the
maximum print position is exceeded.
VALUE DESCRIPTION
* 0
Allow text to print on next line when maximum print position
is exceeded.
1
Truncate text beyond the maximum print position
EXAMPLE: &%Z31,1
Causes text which exceeds the maximum print
position to be lost.
COMMAND 32: PAPER SIZE (LASER)
Specifies the paper size used for printing
VALUE DESCRIPTION
*0
Selects 8 1/2" X 11" letter paper
1
Selects 210mm X 297mm (8.27’ X 11.69”) A-4 paper
2
Selects 8 1/2” X 14” legal paper
EXAMPLE: &%Z32,1
The interface tells the printer to use A-4 paper.
A-13