KEPCO RA 59 - Manual (Page 8)

1-2
RA 59 051313
1.3 ACCESSORIES
Accessories are listed in Table 1-1. See Table 2-1 for Equipment Supplied.
TABLE 1-1. ACCESSORIES
ACCESSORY PART NUMBER USE
CONNECTORS
142-0422 I/O connector mating plug.
108-0294 I/O connector backshell (includes retention screws).
FILLER PANELS
RFP 60-1 Covers 1/4 of front panel.
RFP 60-2 Covers 1/2 of front panel.
ALUMINUM FEET 158-0004 Aluminum feet attach to bottom of rack adapter (set of four).
SCREW 101-0215 Used to attach aluminum feet to rack adapter.
BUS BAR LINK KIT 219-0429
Used to connect + and – terminals of adjacent power supplies for parallel
configurations (two links per kit). See PAR. 2.8 and Figure 2-4 for details.
SCREW 101-0456 Pan head, phillips, self-forming, 6-32 x 1/4 used to attach bus bar links.
SAFETY COVER, DC ** 137-0135 Covers DC output power connections for one slot.
SUPPORT BRACKET (REAR) 128-1909
Auxiliary support when rack adapter fully populated with 4 power supplies.
Two (2) brackets required for each rack adapter. Mount each bracket
using two (2) 6-32 X 3/8" thread-forming screws (Kepco p/n 101-0456)
and two (2) internal tooth lock washers (Kepco p/n 103-0015), see Figure
1-2.
SCREW, THREAD FORMING
6-32 X 3/8"
101-0456 Two (2) screws required to mount each rear support bracket.
LOCKWASHER,
INTERNAL TOOTH
103-0015 Two (2) lockwashers required to mount each rear support bracket.
** If AC Input safety cover required, contact Kepco.