KEPCO RA 19-3B - Manual (Page 37)

RA 19-3B 011409
2-21
2.4.4.2.2 OPEN ON FAILURE USING EXTERNAL WIRING OF I/O MATING CONNECTOR
Figure 2-15 illustrates an open on failure alarm configuration using external wiring of the I/O
mating connectors for six power supplies. It is necessary to set DIP switch position 8 to OFF
(open) for each slot included in the open on failure alarm circuit.
FIGURE 2-15. OPEN ON FAILURE ALARM CONFIGURATION USING EXTERNAL WIRING
AT I/O MATING CONNECTOR, SIMPLIFIED DIAGRAM
2.5 TERMINATIONS
All input, output and control terminations are located on the rear panel of the rack adapter (see
Figure 1-4).