Ericsson Scan And System Portable Radios LPE-200 - Manual (Page 9)

AE/LZB 119 1902 R1A
9
KEYPAD SCAN/SYSTEM FUNCTIONS
Figure 2 - Scan Keypad
Figure 3 - System Keypad
Key Function
▲ ▼
Primary Function: Allows user to select
either system, groups, or channels, depending
on personality programming. The buttons act
as STEP UP or STEP DOWN. Pressing one
of these buttons displays the next or previous
stored system, group or channel.
Secondary Function: Changes the selection
for an item within a list.
M
Primary Function: Accesses the pre-stored
menu. The menu can include high/low power
setting, keypad lock, LCD contrast, LCD and
keypad back lighting.
Secondary Function: Activates a selected
item within a list. After a menu list is
accessed, scroll through the list using the
,
keys and then activate specific
items with the M key. This is similar to an
“Enter” key.
Key Function
A/D
(Scan
only)
Adds/Deletes selected groups or channels
from the Scan list of the currently selected
system.
SCN
(Scan
only)
Turns the Scan operation On and Off.
OPT
(Scan
only)
Activates one of a number of programmable
software options, selected during the PC
programming. Programmable options
include high/low transmitter power and talk-
around.
1
(System
only)
Used to select a specific system. If the rotary
knob is used to select the system and more
than 16 systems are programmed in the radio,
the
key is used to select additional
banks (groupings) of systems.
1-9, *,
0, #
(System
only)
These keys are used to place telephone
interconnect and individual (unit-to-unit)
calls. The keys operate like a normal
telephone keypad.
2
(System
only)
Used to select a specific group.
3
(System
only)
Used to turn the SCAN operation on and off.
*
(System
only)
Used to place telephone interconnect calls.
#
(System
only)
Used to initiate individual calls.
6
(System
only)
Adds groups or channels from the Scan list of
the currently selected system.
9
(System
only)
Deletes selected groups or channels from
Scan list of the currently selected system.