KEPCO FAW 15W Series - Manual (Page 2)

2 228-1156 062599
KEPCO, INC. !"! 131-38 SANFORD AVENUE !" FLUSHING, NY. 11352 U.S.A.!!" TEL (718) 461-7000!!"! FAX (718) 767-1102!!
http://www.kepcopower.com "! email: [email protected]
LEAKAGE CURRENT
(UL method, 120V a-c, 50-60Hz): 0.5 mA maximum.
(VDE method, 240V a-c): 0.75 mA maximum.
SAFETY: UL 478 recognized; CSA 1402B certified, VDE 0806, IEC 380 approved by TÜV Rheinland
“POWER OK” SIGNAL OUTPUT: The unit supplies a “POWER OK” logic 1 signal at CP51 (see Figure 2).
CONNECTOR TYPES: Refer to the Mechanical Outline Drawing. The mating connector for CP51 is a Panduit, P/N CT10F22-2: Cover, P/N
TC100F-2.
CONNECTOR KIT: Kepco furnishes an optional connector kit with the specified connector listed above. The kit may be ordered under Kepco
Model Kit P/N 518-0029. The connector is provided with 1 meter length leads for trimming to desired lengths.
EMI: Designed to meet FCC Class B (100-120V a-c) and VDE 0871 Class B (220-240V a-c).
VIBRATION: (non-operating, one hour on each one of the three axes):
5-10 Hz, 10 mm amplitude.
10-55 Hz, 2g acceleration.
SHOCK: (non-operating, one-half sinusoidal pulse, three shocks to each axis):
Acceleration: 20g
Duration: 11ms +5ms
OPERATING TEMPERATURE: See Figure 1.
STORAGE TEMPERATURE: -40
o
C to +75
o
C.
OPERATING AND STORAGE RELATIVE HUMIDITY: up to 95% (wet bulb temp. <35
o
C non-condensing).
FUSE: Quick acting 2A, 250V; (5.2 x 20mm), San-O P/N MT4 2A; Kepco P/N 541-0109.
WARRANTY: 1 year.
FIGURE 1. OUTPUT POWER RATING VS. AMBIENT TEMPERATURE FIGURE 2. “POWER OK” SIGNAL RELATED TO OUTPUT
3040229/1161