Subaru Robin RGD3300H - Manual (Page 33)

– 30 –
5 Stator (3) Pull out the wires from rear cover.
6 Rotor (1) Take off the through bolt.
Apply a box wrench on the head of
through bolt. Hit the wrench handle
with a hammer counter-clockwise to
loosen.
Box wrench
Plastic hammer
(2) Put the engine on the working table
recoil starter side down.
Step Part to remove Description Remarks Tool
SUPPORT RING
STATOR
REAR COVER
6 ø BOLT 4 pcs.
GENERATOR_GS2380.fm 30 ページ ２００７年１０月１日 月曜日 午前９時１３分