Subaru Robin EH72 LP/NG - Manual (Page 17)

- 14 -
33) ENGINE OIL
Refill engine oil and start the engine .
Engine oil will be lubricated oil passages
and oil filter . Check the engine oil level and
refill again to the upper level of oil level
gauge .
32) FINAL CHECK
Be sure to check loosen bolts and nuts, and also electric wiring connections .
Oil Capacity
1 .55 liter (0 .41 U .S . gal .)
4-5 BREAK-IN OPERATION
An engine that has been completely overhauled by being fitted with a new piston, rings, valves
and connecting rod should be thoroughly RUN-IN before being put back into service . Good
bearing surfaces and running clearances between the various parts can only be established by
operating the engine under reduced speed and loads for a short period of time .
While the engine is being tested, check for oil leaks .
Make final carburetor adjustment and regulate the engine operating speed .
NOTE ;
* Check the oil level with the oil gauge inserted.
* Use “SE” (API classification) or higher grade
engine oil.
OIL GAUGE
UPPER LEVEL
LOWER LEVEL
OIL GAUGE
UPPER LEVEL
LOWER LEVEL
833(5/(9(/
/2:(5/(9(/
2,/*$8*(
2,/*$8*(
Standard Option
STEP EH72 FI Engine speed (rpm) Time (minute)
1
No Load
2500 10
2 3000 10
3 3600 10
4 7 .5kW (10 .0HP) 3600 30
5 14 .9kW (20 .0HP) 3600 30