Subaru Robin EH72 LP/NG - Manual (Page 15)

- 12 -
27) FUEL PUMP and FUEL PIPE
(1) Install fuel pump bracket onto #2 cylinder
baffle .
FUEL PUMP
M6 x 12 Flange bolt : 1 pc .
28) AIR CLEANER and BREATHER PIPE
(1) Connect breather pipe to air cleaner base .
(2) Fit air cleaner base onto throttle body .
M6 x 12 Flange bolt : 3 pcs .
(2) Connect the wiring to the fuel pump .
(3) Connect fuel pipe between throttle body
and fuel pump .
(2) Connect the wiring to the oil pressure
switch .
(3) Connect breather pipe to #1 cylinder head .
(4) Set air cleaner element along with urethane
foam onto base .
(5) Install air cleaner cover with knob .
29) OIL PRESSURE SWITCH
(1) Install oil pressure switch onto adapter (Oil
cooler) .
FUEL FILTER
RETURN HOSE
PULSATION DAMPER
FUEL PUMP
CONNECTER
(FUEL PUMP)
AIR CLEANER BASE
2,/35(6685(6:,7&+
Tightening torque
6.8 - 8.8 N•m
(70 - 90 kgf•cm)
(5.0 - 6.5 ft•lb.)
Tightening torque
6.8 - 8.8 N•m
(70 - 90 kgf•cm)
(5.0 - 6.5 ft•lb.)
Tightening torque
5.9 - 9.8 N•m
(60 - 100 kgf•cm)
(4.3 - 7.2 ft•lb.)
NOTE ;
Not to tighten excessively.