Electrolux 1600 - Manual (Page 34)

34
3. Press the START button.
– If short spin is selected the water will be drained and the washing
gently spun.
– If drain is selected the water will be drained (without being spun).
Unloading the washing
If the
O
§ symbol is shown in
the display, the door can be
opened.
1. Open the door using the
handle.
2. Remove the washing.
3. Press the control knob.
The appliance is now switched off.
Important: If the washing machine will not be used for a longer period
of time:
Turn off the tap and remove the plug from the mains. (The Aqua Con-
trol water protection system does not function without an electricity
supply.)
OVERDOSING indicator
If OVERDOSING is shown in
the display at the end of a
wash cycle, too much deter-
gent was used in the com-
pleted wash programme.
Please take note of the dos-
age instructions provided by
the detergent manufacturer
and the amount of washing loaded the next time you wash.
END
O§
PLEASE TAKE OUT THE CLOTHES
###############
MOISTURE 32 %
END
O§
PLEASE TAKE OUT THE CLOTHES
###############
MOISTURE 32 %
OVERDOSING