Electrolux 1600 - Manual (Page 21)

21
RINSE+
P
The washing machine is set
such that its water con-
sumption is extremely eco-
nomical. For people with
allergies and in areas where
the water is very soft, it can
however be helpful to use
more water when rinsing.
When you select RINSE+ an additional rinse cycle will be carried out,
except for the WOOLLENS
H, SILK H and LINGERIE programmes. If
RINSE+ has been selected,
P will appear in the symbol row.
WATER COOLING
Before being drained at the end of the main wash cycle the wash water
is cooled by an inflow of cold water in order to prevent the plastic drain
pipes from sustaining thermal damage. This basic setting only takes ef-
fect with the COTTONS, LINEN/EASY-C. and ENERGY SAVING pro-
grammes.
GENTLE SPIN
Adjustable spin cycle, integrated with the final spin cycle. The washing
does not cling to the side of the drum as much and can be removed
more easily.
LANGUAGE
To set the language in which the indicators are to appear in the display.
(See chapter “Changing the language”.)
TIMER
To set the current time. This is important as it enables the end of the
wash programme to be shown in the display and the DELAY START addi-
tional function to be used. (See the chapter “Before washing for the
first time: Setting the timer”.)
VOLUME
You will hear an acoustic signal when you press the buttons. The vol-
ume of this signal can be regulated and/or the signal can be switched
off. The volume of the alarm for error messages cannot be altered.
EXTRAS
ì
SELECT
MEMORY
BACK RINSE+)
WATER COOLING
GENTLE SPIN.