TA Triumph-Adler DCC 2520 - Manual (Page 33)

English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 31
Curled Output
If the copies ejected are curled, adjust using the
pressure roller bottom adjuster knob (E1) and
pressure roller top adjuster knob (E2).
NOTE: Curled paper can cause frequent
paper jams in the conveyor and internal
trays. If this occurs, follow the steps below to
adjust for paper curling.
Paper curled downward
1 Open the front cover.
2 Set pressure roller top adjust knob (E2) to ‘ 1 ’ . For
operation method, see Paper curled upward on
page 32.
3 Pull pressure roller bottom adjust knob (E1) outward and turn in the direction of a higher
number.
Align the knob with a number to lock the knob by setting the knob protrusions into the frame
cutout area.
4 Close the front cover.
E2
E1
5
4
2
2
3
1
1
E1
E2
5
4
2
3
1