TA Triumph-Adler DC 2045 - Manual (Page 8)

1. Preparations
1-1 Names of parts
• Main body
1-1
1 Original cover
Open and close this cover when setting an original on the
platen.
2 Platen
Set the original to be scanned face-down in the left-rear
portion of the platen.
3 Original size indicator lines
Be sure to align the original with these lines when setting
an original on the platen.
4 Operation panel
Perform operations here.
5 Main switch
Turn this switch ON ( | ) in order to use the scanner.
6 Scanner interface connector
Use to connect the scanner to the computer network with
a 10BASE-T or 100BASE-TX cable.
* NEVER attempt to remove the Scanner Interface Card.
* The illustrations above show a 45 ppm machine.