TA Triumph-Adler DC 2020 - Manual (Page 28)

Page 2-10
2-5-3 The Main Frame
The main frame displays system information in regard to the scanner. Selecting the language that you want
to use is also accomplished here.
* The registered default values will be displayed during start up of WebPage Functions.
• Scanner Status Information
When “O OTHER” is displayed under Scanner Status on the home page, click on the Refresh button at
the bottom of the screen and the status of the scanner will be displayed here. When “O OK” is displayed
under Scanner Status, “Ready to Scan” will be displayed here.
The following 6 status indications can be received from the scanner: “Ready to Scan”,“Using Scanner”,
“Paper Misfeed in Feeder”, “System Error”, “Processing” and “Energy Save Mode”
• Ethernet Address
Displays the MAC (Medium Access Control) address of the scanner interface card.
• Network Firmware
Displays the firmware version of the scanner interface card.
• Scanner Firmware
Displays the firmware version of the scanner.
• Language
You can select the language that you want to use in WebPage Functions.
* The factory default setting for the language is English.
2-5 The Home Page