TA Triumph-Adler MFP 980 - Manual (Page 41)

3-4
Setting your machine
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
You may choose between more than one criteria for printing reports:
•
WITH
: a report is given when the transmission was properly performed or when it is completely
abandoned (but there is only one report per request),
•
WITHOUT
: no transmission report, however, your fax will note all transmissions that took place in
its log (refer to paragraph Logs, page 5-18),
•
ALWAYS
: a report is printed with each transmission,
•
ON ERROR
: a report is printed only if the transmission failed or is abandoned.
With each transmission report from memory, a reduced version of the first page is automatically
reproduced.
To select the report type:
231 OK - SETUP / SEND / SEND REPORT
Select the required option
WITH
,
WITHOUT
,
ALWAYS
or
ON ERROR
and confirm your choice
with OK .
Document feed type
You may choose the way you want to feed your documents:
• from memory, transmission will take place only after memory storage of the document and dial-
ling. It allows you to get your originals back quickly to free up the machine.
• from the feeder of the sheet-feed scanner (refer to paragraph Document depositing, page 5-1),
transmission will occur after dialling. It allows transmission of larger documents.
To select the way you want to feed your documents:
232 OK - SETUP / SEND / MEMORY SEND.
Select the option
MEMORY
or
FEEDER
and validate your choice with OK .
Remark : in feeder mode, the reduced image will not appear on the transmission report.
Economy period
This function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost of your
communications.The economy period, via the telephone network (at off-peak hours), is preset by
default from 7.00 pm to 7.30 am. Nevertheless you may change this time slot.
Modifying the economy period:
233 OK - SETUP / SEND / ECO PER.
Enter the hours of the new economy period and confirm your selection with the key OK .
Using the economy period:
32 OK - FAX / ECO TRANS.
Enter the call number and confirm with
OK
.