TA Triumph-Adler FAX 930 - Manual (Page 36)

3 1
3. LAST TEN NUMBER REDIAL
Your fax machine enables you to re-dial any of the last 10 numbers dialled.
To re-dial one of the last ten FAX numbers dialled:
Press the REDIAL or key (*); the display will show the last number dialled.
You can select an earlier number using the and keys on the navigator pad, or by pressing REDIAL
or (*) again.
Press on the FAX/COPY or INTERNET keys, and your fax machine will transmit the fax to the chosen number.
To re-dial one of the last ten Internet addresses entered:
Press the INTERNET key followed by the REDIAL key (*) and proceed as above.
4. FAX BROADCASTING
The fax broadcast facility enables you to send a document out to several subscribers at once (by fax or over the Internet).
Note:
The fax machine must be set to Send from Memory (see the SETTINGS chapter).
Place the document in the fax machine’s scanner feeder.
Dial the fax number or key in the name of the first subscriber.
Notes:
- By pressing the DIRECTORY key, you can rapidly access the quick-dial number or one-touch dial key of
a subscriber or broadcast list.
- By pressing the REDIAL key, you can access the last 10 numbers dialled.
Press the BROADCAST key to enter the next subscriber’s quick-dial number.
Key in the second subscriber’s quick-dial number.
Repeat the procedure for all the subscribers (whether fax or Internet-based) or broadcast lists to which you want to
send the document (up to 8 subscribers).
Press on the FAX/COPY or INTERNET keys.
5. STOPPING A TRANSMISSION IN PROGRESS
To stop a transmission in progress:
Press on STOP. The fax machine will prompt you to press STOP again to confirm.
Press STOP again to confirm your instruction to abort the transmission.
Notes:
- In the case of a fax transmitted from memory to a single subscriber, the document is erased from memory.
- In the case of a fax transmitted to several subscribers, only the current subscriber at the time the STOP button is
pressed is removed from the transmit queue.
- If the transmission report parameter is set to anything but WITHOUT, the fax machine will print out a
transmission report indicating that the operator aborted the fax’s transmission.
A
(*) Depending on model.
CH07 23228395-7 A.P65 10/08/2000, 07:42 31