TA Triumph-Adler FAX 930 - Manual (Page 17)

1 2
STEP BY STEP FUNCTION ACCESS
In this mode, you use the and keys of the navigator pad to scan through the options of a menu, and the OK and C
keys to access the following or previous menu level.
Example 1:
To access the PRINT OUT DIRECTORY menu step by step:
Example 2:
To access your unit’s date and time settings:
To access this function step by step:
Press the MENU key.
Move the cursor to 2 SETUP by pressing the key on the navigator pad once.
Press two times OK.
Note:
Throughout this document, the position of the data entry cursor will be represented by a “_”.
To input a new date and time, e.g. 16:45 on 07 March 1998, enter the following sequence using the numeric
keypad: 0, 7, 0, 3, 9, 8, 1, 6, 4, 5.
Should you need to amend the data you have entered, use the and keys to position the cursor on the
character to be altered.
Once you have input the right date and time, press OK to confirm your entry and enter a number to dial, or press
FAX/COPY to confirm your entry and exit the menu.
DIRECT FUNCTION ACCESS
In this access mode, you press the MENU (FUNCTION) key followed by a numerical code to directly access the function
required.
Example:
Setting your unit’s date and time
To access this function directly:
Press MENU followed by 2, 1 and OK. You are now in data entry mode and can enter the new date and time using
the numeric keypad (see previous section).
MENU
1 DIRECTORY
2 SETUP
14 CANCEL
15 PRINT
11 ADD NAME
12 ADD LIST
OK OK
C
4 times
OK
CH02 23228395-7 A.P65 10/08/2000, 07:41 12