TA Triumph-Adler FAX 920 - Manual (Page 25)

25
Error codes when sending faxes
# 102
# 104
# 105
# 109
# 110
# 111
# 113
# 114
# 115
Error codes when receiving faxes
# 152
# 153
# 154
# 158
# 160
# 161
Problem
No document in the feeder.
Fault on the telephone line.
The receiving fax machine has a transmission error.
The receiving fax machine is not responding.
There is no signal from the receiving fax machine at the end
of transmission.
An error message is sent by the receiving fax machine at the
end of transmission.
The receiving fax machine requests a second transmission as
there were too many transmission errors in the first transmis-
sion.
The document is too long.
Transmission of one page took too long (more than eight
minutes).
Problem
An error message is received from the sending fax machine at
the start of reception.
The person polling the fax has entered an incorrect password
The sending fax machine does not send a signal at the start
of reception.
The sending fax machine does not send a standard signal.
The machine is not correctly connected to the telephone line
or there is no signal from the sending fax machine.
At the end of the reception process the sending fax machine
does not send a signal or the connection was interrupted.
Error codes