beautypg.com

Ram disk size (setting the ram disk size), Hard disk (using the optional hard disk), To hard disk (using the optional hard – TA Triumph-Adler CLP 4721 User Manual

Page 115

background image

Using the Operation Panel

4-56

IMPORTANT The RAM disk can not be used when an optional hard

disk is installed.
The RAM disk stores data only temporarily. When the printer is reset

or turned off, the stored data will be erased.
The RAM disk allows some Job Box functions to be used.
The RAM disk is allocated from the printer memory available to users.

If the size of the RAM disk is set too large, the printing speed may

decrease or the memory may become insufficient.

1

Press Z while Device Common > is displayed.

2

Press U or V repeatedly until >RAM Disk Mode > appears.

3

Press

[OK]. A blinking question mark (?) appears.

4

Select On or Off using U or V.

5

Press

[OK].

6

Press

[MENU]. The display returns to Ready.

RAM Disk Size (Setting the RAM disk size)

Use this procedure to set the amount of memory used for the RAM disk.

IMPORTANT The RAM Disk Size menu option only appears when
RAM Disk Mode

is set to On.

1

Press Z while >RAM Disk Mode On > is displayed.

2

Press

[OK]. The message display shows a blinking cursor (_). Press

U

or V to display the desired size. Definable RAM disk size is

001

to

512

. Use Y and Z to move the cursor right and left.

This range varies depending on the total memory size of the printer.

3

When the desired RAM disk size is displayed, press

[OK].

4

Press

[MENU]. The display returns to Ready. Turn the printer off and

then on again. The selected RAM disk size is activated after the

printer is restarted.

Hard Disk (Using the optional hard disk)

Installing the optional hard disk into the printer allows you to perform the

following operations on the hard disk.
Format (Formatting hard disk)
When an optional hard disk is inserted into the printer for the first time, it

must be formatted before use.
This menu is displayed only when the optional hard disk is installed on the

printer.

1

Press Z while Device Common > is displayed.

>RAM Disk Mode >

? Off

>>RAM Disk Size

119 MByte

Note If the optional hard disk is installed in the printer, the

Custom Box and Job Box will be available.

26 ppm.

An optional hard disk can only be installed on the printer model

This manual is related to the following products: