Rose Electronics VISTA L-SERIES - Manual (Page 21)

Vista L-Series Installation and Operations Manual 15
Keyboard commands (continued)
Command Key Sequence Description
Mode
command M x
Where:
x = 1 for mode 1
x = 2 for mode 2
x = 3 for mode 3
x = 7 for mode 7
x = 8 for mode 8
x = 9 for mode 9 First select the CPU port to
configure, and then enter the
mode command.
Mode 1, 2, 3 for keyboard:
Mode 7, 8, 9 for mouse
Maximum
computers P x
(x = 1 – 4 or 1 – 8) Limits scanning to maximum
port number
Typematic
value Factory setting = 43
Rate = 10.9
chars/sec
Delay = 500 millisec. See Appendix F.
Mouse type Q x
Where:
x = 0 for PS/2 mouse
x = 1 for Serial
mouse
x = 2 for Wheel
mouse First select the CPU port, and
then enter the type command
Computer
Select x
(x = 1, 2, 3, 4,
5, 6, 7, 8) Connects your keyboard,
video monitor, and mouse to
the selected computer.
Connect to
next computer + (Plus) Selects the next sequential
computer.
Connect to
previous
computer - (Minus) Selects the previous
sequential computer.