RIGOL DM3068 User Manual
Page 53
RIGOL
DM3068 Quick Guide
9
2. LAN Port
Provides the multimeter an access to LAN for remote controlling. The multimeter
conforms to LXI-C standards; it can be used in connection with other standard
devices for a testing system built, easily approaching a LAN based system
integration.
3. GPIB Port
Conforms to IEEE-488.2 standards.
4. Power Socket
The multimeter allows two types of AC supplies. Users should use the power
cord that came with your multimeter to connect the multimeter to the AC power
through this socket. Note a proper voltage scale must be first selected (through
the Voltage Selector) before power connection.
Figure 7 Connect the Power Cord
5. VMC Output
Outputs a low-true pulse from [VM Comp] terminal after every measurement
when VM output is enabled (
VMC ON).
6. Ext Trig Input
Triggers the multimeter by connecting a trigger pulse through [Ext Trig]
connector. Note the external trigger source must be selected (
Source
Ext).
7. USB Device Port
Communicates with a computer and controls your multimeter through PC
software. It is available for USB-TMC devices.