RIGOL DS6000 Series - Manual (Page 11)

-9-
voltmeter reading.
5) Disconnect the probe tip from the high voltage source before removing the
ground clip.
6. Cleaning
Clean only the exterior probe body and cables. Use a soft cotton cloth lightly moistened
with alcohol and water. Do not allow any portion of the probe to submerge in the liquid.
Dry the probe thoroughly before measuring voltage.
Do not place the probe into the corrosive solvents or fumes as these will cause
deterioration to the probe and cables.
7. Voltage Derating Curve
RP1018H (18kV:3MHz / 300V:150MHz / 100V:1GHz)
Vo
ltag
e (
dc
+
ac
p
ea
k)
Frequency