Install the virtual gauge software – Retrotec DM32 User Manual
Page 4
Page 4 of 15
©Retrotec Inc. 2013
2. Install the Virtual Gauge Software
The Virtual Gauge is part of the DM32 Software Suite along with the Retrotec Data Logger and the
Gauge Configurator. If you want all three applications, when your computer is connected to the
internet, you can use the following link to download an installer for the software suite, or to install the
software directly on your computer:
Once installed, you uninstall each application individually, using the procedure outlined in section 7,
from your computer Control Panel. Once installed, every time you launch the Virtual Gauge and are
connected to the internet, the software will check for updates and offer to download them and update
itself.
Figure 1: Install the DM32 Software Suite including Virtual Gauge, Data Logger and Configurator
Click on the “Install” button in the window that opens, as shown in Figure 1. Follow all the steps in the
figures that follow in order to install each of the software packages in turn on your computer. You will
end up with three desktop icons, including one for the Virtual Gauge.
If you only want the Virtual Gauge application on its own, the latest version of the software is always
available on the internet. When your computer is connected to the internet, you can use the following
link to download an installer for the software, or to install the software directly on your computer. Once
installed, you can uninstall using the procedure outlined in section 7, from your computer Control Panel.
Once installed, every time you launch the program and are connected to the internet, it will check for
updates and offer to download them and update your Virtual Gauge software.
Click on the “Install” button in the window that opens, as shown in Figure 2. Follow all the steps in the
figures that follow in order to install the software on your computer.