Retrotec DM32 - Manual (Page 3)

Page 3 of 15
©Retrotec Inc. 2013
1. Overview of the Virtual Gauge
Virtual Gauge software can run on any computer, laptop or tablet running a full desktop enabled version
of Windows, (version XP SP2 or higher).
The Virtual Gauge provides two separate but related functions – simulation of a Retrotec DM32 series
touchscreen gauge, and remote control and reflection of a real DM32 connected to the computer
running the Virtual Gauge software.
The remote control function lets the user enter parameters on the Virtual Gauge and see them sent to
the real gauge.
The reflection function reflects the values that are showing on the real gauge on to the Virtual Gauge.
Thus using the Virtual Gauge software in conjunction with a real gauge lets users control the real gauge
directly by tapping on its touchscreen or by clicking on the Virtual Gauge screen and all user input is
reflected on both the real and Virtual Gauge screens.
Simulating a touchscreen gauge lets the user practice with the gauge and enter simulated values for
pressure on channel A and channel B. The Virtual Gauge software is meant to be used for training
purposes.