RISCO Group ProSYS EV - Manual (Page 9)

Voice Module Installation Guide 9
LED Indicators
The Voice module includes two LEDs that provide power and
communication indications.
Power LED
The Power LED indicates the status of communication
between the Voice module and the Main Panel.
FM Comm LED
The Follow Me Comm LED indicates the status of
communication between the Voice module and the
remote FM phone.
Condition Description
Off There is no communication with the FM number.
On FM communication has been established.
Slow Flash The Voice module is in the process of calling the
FM number.
Condition Description
Off No voltage power from the main panel
On There is normal communication with the Bus.
Slow Flash The LED starts to flash 15 seconds after
communication with the Bus is interrupted,
or during installation mode the voice
module is not defined in the system.