RISCO Group GT 600 - Manual (Page 33)

Page 32
GT 600 601 User Manual
Setting the system with Line Fault
1) With the display showing:-
2) Enter your User code.
The display will then show:-
(Followed by YES if a Master or Main type code
has been used).
3) Then press NO. The display will show:-
Note: The display will alternate between the EXIT display and the
Phone Line FAULT display as the time counts down.
EXIT! 1
All Zones ON 15
01 JAN 18 : 58 : 01
Phone Line FAULT
Can’t Set ! Check
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 32