RISCO Group GT 600 - Manual (Page 13)

Page 12
GT 600 601 User Manual
Testing The System
(Master & Main codes only)
1) With the display showing:-
2) Enter a Master or Main level code,
the display will show:-
3) Press NO, the display will show:-
4) Press NO, the display will show:-
5) Press YES, the display will show:-
6) Press YES to test the full system.
or
NO.Then select the area you wish to test. Then press Yes.
The display will show:-
for 3 seconds.
7) The display will then show:-
8) Pressing 1 will enter zone Status mode (All zones will show on the display
and will be deleted as each zone is triggered). Press 0 to escape.
Pressing 6 will silence the internal sounder,
Pressing 4 will toggle the Strobe On/Off,
Pressing 9 will toggle the Bell On/Off
01 JAN 18 : 58 : 01
Do you want to . .
REMOVE Zones ?
Do you want to . .
TEST the System ?
Test ALL Areas ?
1=Status 4 = Strobe
6 = Sounder 9 = Bell
< All Zones ok >
TESTING . . .
Do you want to . .
SET the System ?
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 12