Precision Flight Modular Flight Deck with GNS430 and X-Plane 9 User Manual
Page 6
Set Up Guide For MFD with G430 and X-Plane 9 Page 6
8. Select the #2 display with single click. It should have a blue square highlight as shown
below.
9. After selecting the #2, set the Resolution to 1024 X 768.
10. Next is to change the option for Multiple Displays to Extend these displays.
11. Click on Apply to accept the changes and click on OK close the window.
12. Once you are done with steps 1 to 8, your Screen Resolution window should look just
like in the picture above. Special attention should be given to the arrangement of #1
and #2 display, #1 on the left and #2 on the right. Also the displays should be aligned
and even as shown.