Precision Digital PD662 - Manual (Page 9)

PD662 Loop-Powered Meter Instruction Manual
9
SAFETY INFORMATION
CAUTION: Read complete
instructions prior to installation
and operation of the meter.
The equipment shall be installed by qualified personnel in accordance
with applicable local and national regulations (e.g. CEC, NEC, FCC,
SCC, etc).
Follow all safety and operation guidelines in this manual. If the meter is
used in a manner not recommended by the manufacturer, the overall
safety will be impaired.
Installation and service should be performed only by trained service
personnel.
This unit is not suitable for hazardous locations such as potentially
explosive zones or locations.
No user replaceable part inside. All service shall be performed at the
factory.
Do not disconnect and reconnect cables during a lightning storm.
Suitable surge suppressor (e.g. lightning protection) shall be provided in
end application installation.
INSTALLATION
All pushbuttons and wiring connectors are accessed by
opening the NEMA 4X enclosure by removing the 4 captive
screws that secure the cover.
Unpacking
Remove the meter from box. Inspect the packaging and
contents for damage. Report damages, if any, to the carrier.
If any part is missing or the meter malfunctions, please contact
your supplier or the factory for assistance.
!