MEDC Weatherproof ResistTel IP - Manual (Page 32)

Page 32 Short Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
d. Press key (short or long) or the key . With a configured headset
you will reach the headset mode otherwise the hands free mode.
2.3.6
Muting
You can mute the microphone during a call to make a confidential enquiry in the
room without being heard on the phone.
Torsten 72
Thomas 77
06.01.10 14:40 0:22
Figure 18: Muting
1. Press the key during a call for more than a second. The microphone symbol
" " flashes (see Figure 18). The microphone is switched off. You can now make a
room enquiry.
2. Press the Mute key during a call for more than a second again. The flashing
microphone symbol disappears and the microphone is switched on again.
2.3.7
Making second Call
The line can be put on hold during a call. With the call on hold, you can make a
second call to someone else. The person on hold can't hear the second call. The hold
function is also needed to switch or transfer a call.
Torsten 72
Peter 36
Torsten 72
Please dial
06.01.10 14:40 0:22
Figure 19: Holding a Call
1. Press the key (short) during a call. The call is put on hold. you hear a dial
tone. The line on hold is displayed normally, the active line inversely (see Figure
19).
2. Dial the call number. A further connection is established.