MEDC Weatherproof ResistTel IP - Manual (Page 20)

Page 20 Short Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
1.5.5
Sling Holder
The holding strength for the handset is continuously adjustable.
Loosen the screws (12) and move the stopping catches (13) (See Figure 5 – Figure
7Figure 5: Set View). Pushing the stopping catches together increases the holding
strength whereas pulling them apart reduces it. Tighten the screws again.
1.5.6
General
The receiver is equipped with a leakage field spool for coupling of hearing aids. Users
of a hearing aid with inductive receiver may receive the signal from the receiver inset
directly.
1.6
EMC-Directive
The device complies with the requirements of the new EMC-directive 2004/108/EC,
the low voltage directive 2006/95/EC and the R&TTE directive 1999/5/EC.
The conformity with the above directives is confirmed by the CE sign.