Marshall Electronics CV342-CSB / CS - Manual (Page 14)

14
1080 HD-SDI Camera
MAIN MENU
1. LENS
2. EXPOSURE
3. BACK LIGHT
4. WHITE BAL
5. DAY & NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. RESET
10. EXIT
DC
HSBLC
ATW
B/W
DAY & NIGHT
COLOR, B/W
DAY & NIGHT
1. BURST OFF
2. IR SMART ON
3. IR LED ON
4. IR PWM IIIIIIIIIIIIIIII O
5. RETURN RET
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.
BURST: Determines whether to transmit the burst signal or not .
IR SMART: Decrease screen saturation of objects within a short range.
LEVEL: Adjust level of the IR SMART function.
AREA: Select the area to activate the IR SMART.
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.
IR LED: Enable/Disable IR LEDs.
IR PWM: Adjust the IR LEDs output level.
IR SMART
1. LEVEL IIIIIIIIIIIIIIII 5
2. AREA
3. RETURN RET
POSITION