MCZ Guttuso User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
GUTTUSO
page
7
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE FORMA PURO95
Place the Forma Puro95 in the desired position and at a safe distance from the rear wall. Raise the
fireplace stove so that the height of the edge-cover profile with respect to the floor is 333 mm (= height of fire
bed of cladding).
A second adjustment of the unit, if necessary, is made during assembly of the cladding.
N.B. There are various ways of raising the Forma Puro95, at your discretion. However, any solution
must ensure safety and stability of the unit.
Before proceeding with the connection to the flue pipe and with complete installation of the fireplace stove,
check the correct position of Forma Puro95 with respect to the fire bed(1) of the Guttuso cladding. When the
check is complete, install the unit Forma Puro 95 in accordance with the instructions in the respective
Manual for
Installation and Use and run a quick test for proper operation. If the test is successful, you can install the
Guttuso cladding.
PAVIMENTO
BASE APPOGGIO
FORMA PURO
DISTANZA
DI SICUREZZA
33
3
PROFILO
COPRIBORDO