MCZ Kasai User Manual
Page 20
Chapter 4
USE AND MAINTENANCE MANUAL
page
20
Installation and assembly
Technical dept. - All rights reserved by MCZ GROUP S.p.A. - Reproduction
prohibited
A
b
1
2
6 + 7
3
9
8
U
V
B
B
4 + 5
4. The metal sides (“6-7”) with the profiles (“8-9”) assembled
previously should be secured to the structure of the stove,
inserting the purpose-provided pins “B” featured in the lower
part of the side in holes “b” featured in the stove.
Subsequently, on the upper part of the side, secure the two
screws “A” (one to the left and the other to the right) to the
edges of the structure where the holes are featured.
Repeat the same procedure for the other side (fig.8).
Insert the spacers (rubber pad “U” + washer “V”) into the
holes at the top of the sides for the top to rest on.
Figure 8 - Side cladding (Kasai stove)