MCZ Duo HYDRO AIR - Manual (Page 37)

35
6-ELECTRICAL CONNECTION
Technical Dept. - All rights reserved - Reproduction is prohibited
ELECTRICAL CONNECTION
First connect the power cable to the back of the stove and then to a wall socket.
The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.
It is recommended to disconnect the power cable when the stove is not used.
STOVE POWER SUPPLY
After connecting the power cable to the back of the stove, turn the switch at the back to position (I).
The luminous switch button will light up.
The switch on the back of the stove is used to power the system.
On the rear of the stove there is a fuse holding compartment which is located underneath the supply socket. Use a screwdriver to open the
fuse-holder compartment and if necessary replace them (3.15 A delayed)
ELECTRICAL STOVE CONNECTION
STOVE POWER SUPPLY
FUSE HOLDER COMPARTMENT
STOVE SWITCH