Edirol UA-1000 - Manual (Page 32)

32
Basic connections and settings
Inserting an external effects processor
If you want to use an external effects processor to process the sound of a mic or guitar being input from each
inputs, you can use the rear panel
insertion/input jacks 1–4 as insertion jacks.
fig.insert
● Connections
Connect insertion cables to the rear panel insertion/input jacks 1–4 , and connect the other end of the cable
to your external effects processor.
You will need to use special insertion cables. (Sold separately: Roland PCS-31)
● Insertion/Input jack select switch
Since you will be using insertion/input jacks 1--4 as insertion jacks, select INSERT ( ( button outward).
Signal flow
fig.insert-flow
PCS-31 (sold separately)
OUTPUT
INPUT
Red
White
INSERT External effect processor
INSERT 1
INPUT 1
Rear
Front
UA-1000
OUTPUT
OUTPUT INPUT
External effect processor
Signal flow
UA-1000_e.book 32 ページ ２００３年８月６日 水曜日 午前１１時５２分