MCZ Club 2.0 AIR - Manual (Page 36)

90°
A
V
34
7-SUITE/CLUB STOVE ASSEMBLY
ADJUSTING THE CERAMICS
Because of the vibration due to transport, it is possible that the product loses some alignment in the structure and, as a result, the side
ceramics may not be perfectly mounted (ceramics not in alignment or misaligned with the structure). In case of difficulty, we recommend
performing the following operations:
• Verify that the structure is at set perpendicularly (90°), by placing a square between the rear strut and the stove base as shown in
the following image
• If the angle is not 90°, loosen the four upper screws “V” and through slot “A” in the structure, restore the stove’s planarity. Now
proceed with assembling the ceramics.