Edimax Technology EW-7205AP - Manual (Page 20)

Wireless LAN Access Point Configuration
18
3.2.2 Using the SNMP Manager
Before using the SNMP Manager to configure the Access Point, verify the Ethernet
station and the Access Point are on the same subnet. The following is the default IP
address and Sub Mask of the Access Point:
Default IP Address: 10.170.254.32
Default Sub Mask: 255.255.254.0
In order to change the IP address and Sub Mask of the Access Point, you must use the
AP Utility Application (only through the USB port). Please refer to Section 3.1.2 for
the IP Address and Sub Mask configuration.
On the Start Menu, choose Start->Programs->Atmel Utilities->AP Configuration-
>AP Configuration to start using the configuration tool.