Edimax Technology EW-7205AP - Manual (Page 11)

Wireless LAN Access Point Configuration
9
The parameters for the Wireless LAN Access Point are described below:
Parameters Description
MAC Address
The MAC Address of the Access Point.
Regulatory Domain This parameter is used to designate the Access Point’s
regulatory domain. There are seven domains you can set
including FCC, DOC, ETSI, SPAIN, FRANCE, MKK
and MKK1. Note that the Regulatory Domain and the
Wireless Channel parameter have the specific
corresponding relation listed as below.
FCC (USA): 1-11 DOC (Canada): 1-11
ETSI (Europe): 1-13 SPAIN: 10-11
FRANCE: 10-13 MKK: 14
MKK1: 1-14
Ethernet IP Address The IP address of the Access Point. This IP Address must
be unique to your network. The default IP Address of
Access Point is 10.170.254.32.
Ethernet Subnet Mask The Ethernet station and the Access Point must be on the
same subnet. The IP address for the Access Point must
correspond to the Subnet Mask. The default Subnet Mask
of Access Point is 255.255.254.0.
Wireless MAC Address Specifies the BSSID. It must be the same as the Ethernet
MAC Address.
ESSID The ESSID (up to 32 printable ASCII characters) is the
unique name identified in a WLAN. The ID prevents the
unintentional merging of two co-located WLANs. Please
make sure that the ESSID of all points in the network are
the same.
ESSID Length The length of the ESSID (number of characters).