Silvercrest SGR 150 A1 - Manual (Page 11)

8 SGR 150 A1
GB
WARNING! RISK OF INJURY!
Exercise caution in your interaction with the drums 3 4 5 6 q.
The blades are very sharp!
NOTICE
► When you wish to remove the drum, rotate the drum housing 0 so far that
it, together with the fi tted drum, loosens itself from the motor block. Then
remove the drum from the drum housing 0. Fit the drum housing 0 as de-
scribed above back onto the motor block and insert the desired new drum.
5) Insert the plug into a mains power socket.
The appliance is now ready for use.
NOTICE
► The drums which you do not need can, to save space and always have
handy, be stacked in the storage compartment 7. Press the lid of the storage
compartment 2 down a little at the markings
and simultaneously pull
it backwards. The storage compartment lid 2 can now be lifted off . When
re-attaching the storage compartment lid 2 ensure that the restraints grip
in the holes provided on the appliance.
Operation
CAUTION - PROPERTY DAMAGE!
► NEVER shred hard foods such as ice cubes with this appliance! The appli-
ance could be irreparably damaged!
► NEVER cut up fi brous foodstuff s such as meats with this appliance! The
appliance could be irreparably damaged!
► Do not operate the appliance for longer than 2 minutes in one session.
Afterwards, allow the motor to cool down before using the appliance again.
1) Prepare the foodstuff s: cut larger pieces so small that they fi t easily into the
fi lling shaft w.
2) Place a bowl or other container under the drum housing 0.
3) Press and hold the start button 1. The fi tted drum 3 4 5 6 q begins
to rotate.
!