Silvercrest SKRI 2000 A1 - Manual (Page 137)

134
Handling and operation
SKRI 2000 A1
GB
Automatic station search (AMS function)
Prerequisite: The appliance is in the radio operational mode.
To allocate the memory slots to the station frequencies with the strongest receivable
signals, an automatic station search can be carried out.
NOTICE
With the carrying out of the following described function all previously ►
saved stations will be lost.
Press and hold the button ♦ i i / Memory Scan 14 , or the Memory-Scan
button 36 on the remote control, for at least three seconds. The appliance
begins the station search and allocates the stations found to the memory
slots
to .
On completion of the station search, by a single press on the button ♦
i i / Memory Scan 14 , or Memory Scan button 36 on the remote control,
you can playback all the saved radio stations between and for
10 seconds.
NOTICE
If more than 60 stations are found, only the fi rst 60 reception frequencies will ►
be saved.
If less than 60 radio stations are found, the last memory slots remain un-
►
changed.
Playback of external audio appliances
Connect an external audio appliance, for example, an MP3 player to the ♦
3.5 mm jackplug socket AUX IN 26 on the rear panel of the appliance.
Press the button ♦ Power 6 , or the button 30 on the remote control.
The display indicates the mode in which the appliance is currently in.
Press the button Function / ST ♦ 7 , or the button Function / ST 38 on the
remote control, several times to select the function .
Start playback of the external audio appliance and set the volume as ♦
required.
NOTICE
Follow the operating instructions for the external audio appliance. ►
Connection of iPod/iPhone
With the station 29 you can use the appliance as a speaker for your iPod/
iPhone. When you insert the iPod/iPhone in the station it will, in addition, be
automatically charged.
IB_63920_SKRI2000A1_LB2.indb Abs3:134 17.01.2012 12:07:01 Uhr