Silvercrest SKRI 2000 A1 - Manual (Page 131)

128
Handling and operation
SKRI 2000 A1
GB
Switch the mode iPod off by pressing the button ♦ Power 6 or the but-
ton 30 on the remote control.
To select the "iPod" option for the respective alarm, press the button ♦ i i /
Pr+ / AL1
18
, or the button i i / Pr– / AL2 16
resp. the Pr+ Taste 40 or the
Pr– button 44 on the remote control, until in the display the symbol
appears.
Switching the alarm off
To switch an individual alarm off , in alarm-mode press the button ♦ i i /
Pr+ / AL1
18
, or the button i i / Pr– / AL2 16
resp. the Pr+ button 40 or
the i Pr– button 44 on the remote control, until in display a symbol no
longer appears.
When the alarm time has arrived
NOTICE
When the alarm time is reached, the switch off timer (if enabled) is immedi- ►
ately terminated.
With the setting "Alarm with an alarm tone", a signal tone sounds. The vol-
ume of the signal tone will continually increase until the maximum sound volume
level has been reached. The duration of the alarm signal is limited to 10 minutes.
The radio is thereby switched to "mute".
With the setting "Alarm with Radio" the radio will be switched on. The previ-
ously selected station will be activated for a maximum of 60 minutes at the set
volume.
With the setting "Alarm with iPod/iPhone" the iPod/iPhone will be
switched on. Playback starts with the last selected title and is played at the set
volume for a maximum of 60 minutes.
Press any button to end the currently sounding alarm.
NOTICE
The alarm becomes active again when the next alarm time has arrived (i.e. ►
on the next day).
IB_63920_SKRI2000A1_LB2.indb Abs3:128 17.01.2012 12:06:48 Uhr